18 INCH
REAR WHEEL

The 18 inch rear wheel with the 300 tire has been the series standard tire
for every Boss Hoss since the manufacture year 2017. Basically, this rim
size fits for any Boss Hoss, but it could mean a bit more work to fit this rim
for older models manufactured before 2001. We differentiate between
models from 2010 on and before..

For more information, please contact us via our contact form

18 INCH
FRONT WHEEL

Suitable for all models from manufacture year 2001 onwards. Here, not
only the rim diameter is 2 inch larger than the standard rim, but also the
tire width is changed to 180mm instead of the standard 130mm.
For this, the mudguard brackets and front fenders must be adjusted.

For more information, please contact us via our contact form

Frontfender Steel

As an alternative to our short front fender made of fiberglass we offer here a steel fender
which can be individually adjusted in the length in which it encloses the wheel.

For more information, please contact us via our contact form

20 INCH
REAR WHEEL

The 20-inch rear wheel not only offers enhanced optical aspects, but also
even more ground clearance compared to the series standard 15 or 18-inch rear wheel.
The tire size for this rim is 280/40 R20, which requires various
adjustments depending on the year of construction.

For more information, please contact us via our contact form

FORK PLUGS

These plugs fit into the holes of the adjusting screws for the spring preload
of the fork. Available chrome-plated and in various anodized colors, as well
as with the V8 logo or horse head. When ordering, please specify if the
order is intended for an upside down fork from before or after 2013.
Always delivered as a set.

For more information, please contact us via our contact form

SCREW COVER

Here we offer covers for the screw heads of the shock absorbers and the axle locks
on the rear swingarm. Available in chrome and various anodized colors.

For more information, please contact us via our contact form

Transmission Oil Pan

As an upgrade to the normal oil pan by Boss Hoss we offer here an oil pan which increases
the capacity by 1 liter. For mounting, the bottom plate and the mounting screws of the tub
must be adjusted. Available in chrome and various anodized colors.

For more information, please contact us via our contact form

EXHAUST ADAPTER
BB/ SB

Here we offer an adapter set for the models before the year of construction 2008
Exhaust manifold on. They allow the installation of the exhaust systems from 2008. Thus
is it possible to maintain the look of the sidepipes and still have a cat
and to have a silencer in the exhaust.

For more information, please contact us via our contact form

Transmission Oilcooler

With this transmission oil cooler comes in addition to the normal capacity of the transmission
again a liter of gear oil added. For installation, minor adjustments must be made. Fits all models
that are equipped with a conventional oil cooler

For more information, please contact us via our contact form

EXHAUST PIPE

Fits all models from 2008. With different tube ends made of aluminum.
available in chrome and different anodized colors.

For more information, please contact us via our contact form

Transmission Oil Tank

In addition to the larger gearbox oil pan from our program, we also offer here
an additional gear oil tank. This fits all models that are equipped with a 2-speed
gearbox and bring again 2 liters more transmission oil in addition to the normal
capacity. Available in chrome or various anodized colors.

For more information, please contact us via our contact form

BERINGER FRONT BRAKE

With the combination of Master Cylinder and two 6 Piston Brake Calipers ,
we have the best brake ever for a Boss Hoss. The original brake discs can be taken over.
Switch housing left and right are also available to equip models before 2008 with this system
and maintain the symmetry on the handlebars. Available in chrome and different anodized colors.
It is also possible to move the rear brake to the left side of the handlebar.

For more information, please contact us via our contact form

Hard Case

Pictured here is the original case system by Boss Hoss. Here is enough storage
space for rain gear, drinks, clothes or whatever else you would like to have on a larger
tour. The delivery is usually unpainted.

For more information, please contact us via our contact form

BODYSCREWS

Our body screws are available in various combinations. In chrome or different
anodized colors and with horse's head or V8 logo. Also available in black anodized
and then milled out logo.

For more information, please contact us via our contact form

HYPERPRO SHOCK ABSORBERS

Another important component for chassis improvement. Available in black
and silver or partly chrome-plated. When ordering, please specify for
which model you are ordering the shock absorbers. Super Sport with
280mm or 300mm, standard 330mm or Big Block 340mm length.
Measured is the distance between the center of the shock absorber eye at
the top and the center of the shock absorber eye at the bottom.

For more information, please contact us via our contact form

CUSTOM FENDER BASKET FRONT

These milled basket for the front fender fits for all models with an upside
down fork. They are designed to accommodate a wider fender in
combination with a 180 front wheel. Available chrome-plated or in various
anodized colors.

For more information, please contact us via our contact form

JOCKEY SHIFTER

This hand lever can be adapted to all models with a foot switch Available
chrome-plated or in various anodized colors. Due to the ability to change
gears with the left hand, both feet can be left on the ground whenmaneuvering.
Very helpful for non-secured or wet surfaces.

For more information, please contact us via our contact form

Custom Frontfender

With our custom front fender, we offer a fender that fits visually very well to our other custom trim parts,
such as the custom tank or the custom radiator cowling.

For more information, please contact us via our contact form

Custom lamp holder

Here we offer a lamp holder, which moves the position of the main headlight slightly higher
and more between the fork tubes to get a more uniform picture. The headlight is thus not so much
off the vehicle.

For more information, please contact us via our contact form

CUSTOM FOOTPEG

Here we offer an alternative to the original footpegs by Boss Hoss. Milled aluminum from solid and with
embossed rubber for ideal grip. Available in chrome or various anodized colors.

For more information, please contact us via our contact form

LED HEADLAMP INSERT

Different versions of the LED main headlight insert are available and can
be ordered individually. All headlight inserts have the “e” mark of
conformity. Suitable for all 7-inch headlight housings. With a few
exceptions, this includes all housings that have ever been fitted as
standard at Boss Hoss.

For more information, please contact us via our contact form

CUSTOM FORK

With our custom fork we offer you a significant improvement to the Boss
Hoss basic equipment. Other triple clamps and the corresponding cover
sleeves give the bike a more attractive appearance on the one hand and
enhanced driving stability on the other hand. Various millings and labelings
are possible which can be applied individually.

For more information, please contact us via our contact form

HANDLEBAR 38mm

This handlebar is made of stainless steel and fits for almost all models of
the Boss Hoss brand. Available in polished stainless steel and in all RAL colors.
Width 1025mm - Height 300mm - Pullback to handle 200mm

For more information, please contact us via our contact form

CUSTOM FORKPANELS DOWN

In addition to our custom fork, we offer here a set for lining the lower fork parts, which
receive the axle in the area of the brake calipers. Available in chrome and various anodized
colors. Again, different milled cut can be customized

For more information, please contact us via our contact form

Handlebar 40mm Original Form

This handlebar is made of high quality stainless steel and is more similar to the
shape of the original handlebar of a boss Hoss. However, the shape is a bit more open.
Again, either straight or cranked risers can be supplied. Available in polished, chrome and all
RAL colors. Width 1170mm - Height and pullback varies between the included risers.

For more information, please contact us via our contact form

CUSTOM COOLER SHROUD

The custom cooler shroud gives the bike a completely different look in
the cooler area. On the other hand, it ensures a better airflow through the
cooler. When ordering, please specify if you’re ordering the cover for a
ZZ4 and LS or for a Big Block, as the width varies in this respect.

For more information, please contact us via our contact form

HANDLEBAR DRAG BAR

This drag bar is made of high quality stainless steel and is crafted very
beautifully. For this purpose, we’ll supply either straight or cranked risers
to achieve the ideal sitting position for the driver. They are milled from
aluminum and both risers and the handlebar can be ordered polished,
chrome-plated or in all RAL colors. 1140mm width – height and pullback
varies with the different riser versions

For more information, please contact us via our contact form

CUSTOM LS VALVE COVER

These valve covers are larger and higher than the original included Boss
Hoss valve covers. All in all, they make the engine appear larger and
partially cover the injection bar. They are available chrome-plated or in
various anodized colors. The ignition cable holders and a labeling field ,
which can be individually designed, are integrated.

For more information, please contact us via our contact form

M-LOCK

The M-Lock is a contactless digital ignition lock with RFID technology and
replaces mechanical ignition locks or their electrical switching function.
The ignition is turned contactlessly when the corresponding digital key is
brought close to the M-Lock (switching distance approx. 40–50mm).

For more information, please contact us via our contact form

CUSTOM OIL AND RADIATORCOVER

We also offer various versions of these covers to the original oil filler cap and
radiator cap covers supplied by Boss Hoss. Shown here in chrome with V8 logo.
Available in chrome and various anodized colors as well as V8 or horse head. Also
possible to anodize first and then shape and logo from milling.

For more information, please contact us via our contact form

M-STOP

M-Stop, the adjustable digital brake light modulator for increased driving safety.
Various flashing modes turn the standard brake light into a highly visible warning light.
The following traffic is able to spot the brake actuation of the motorcycle
much better and faster.

For more information, please contact us via our contact form

DIPSTICK

As an alternative to the normal dipstick handle from Boss Hoss,
we also offer with great attention to detail a component which should
not be missing from any high end custom bike. Available in chrome and
various anodized colors and with different millings.

For more information, please contact us via our contact form

Navigation Holder

We offer for different handlebars and different navigation systems a very high-quality
bracket for easy self-assembly. Available in various designs as well as in chrome or various
anodized colors

For more information, please contact us via our contact form

CUSTOM SWINGARM

Our custom swingarm is another upgrade which offers a clear
improvement when riding the bike. It offers more stability than the original
Boss Hoss swingarm and is crafted in a very high quality. Available for
standard and super sport frames and available chrome-plated or various
anodized colors. There is also a labeling field for the axle cover which can
be designed individually.

For more information, please contact us via our contact form

Paint Saver

High-quality aluminum milled washers for mounting on tank mounting
or other visible fittings. High quality than normal U-washers
and available in chrome or various anodized colors.

For more information, please contact us via our contact form

CUSTOM SIDE COVER

These modified side covers are available only for the LS series. When
ordering, please specify if you are ordering the lids for a Super Sport or for
the standard frame. They have a specially structured surface so that the
overall appearance has a relaxed effect. They also cover the starter and
the oil filter, and emphasize the contouring of the engine and the tank.

For more information, please contact us via our contact form

PERFORMANCE BRAKE REAR

Our performance brake for the rear wheel consists of a mounting kit, a 4-piston caliper
and an internally ventilated disc. Saddle and disc are from the performance area for Porsche
and are used normally on the racetrack. Available in chrome and various anodized colors. Fits without
modifications from year 2004. For the models before various adjustments are required.

For more information, please contact us via our contact form

CUSTOM TANK

This tank is the perfect complement to our side covers, the radiator cowling and the front fender.
The original tank will be retained and covered. Here are also various variants available that can be
discussed individually.

For more information, please contact us via our contact form

FRONT WHEEL SPACER

From the solid milled spacers for the front wheel. Available in various designs. Replace the
normal jacks that are standard built by Boss Hoss. Fits all models with 1 "front axle and ball
bearings in the hubs.

For more information, please contact us via our contact form

CUSTOM IGNITION KEYHOLDER

This ignition lock holder can be individually designed to accommodate all additional switches can.
Very high quality machined from aluminum and available in chromed and various anodized colors.

For more information, please contact us via our contact form

SWING CONE

Upgrade the normal tensioning cone in the rear swingarm. Available in chrome and various anodized colors.

For more information, please contact us via our contact form

Dash Inserts

Here we offer the so-called "Dash Inserts", which fit into the recesses of the dashboard
and can also be individually designed. Available in chrome with "boss" "Hoss" lettering or in
chrome, as well as in various anodized colors individually designed. When ordering, please specify
whether the inserts are required for model before or after 2006.

For more information, please contact us via our contact form

Transmission Winters

Available now! Winters 2 speed semi automatic with reverse gear.
Gearbox damage is now a thing of the past!
Full 2 speed gearbox with reverse gear for all models from model year 2000
Transmission for extreme power up to 1000 HP.
Upon request, we will trade in your old Nesco gearbox .

For more information, please contact us via our contact form

FUEL RAIL COVER

Here, we’re offering a cover for the injection bars of LS engines, chrome-
plated or anodizable in various colors. The cover is milled from
aluminum and shows the horse head of our logo.

For more information, please contact us via our contact form

WINDVEST WINDSHIELD 14X14

With the Windvest windshield in the size 14x14 inches we offer a small windshield which does
not destroy the look of the bike and is very effective. Available in clear and tinted and with chromed
or in all RAL colors coated bracket for mounting on the risers. Due to its high quality, Windvest has been
a regular partner of Boss Hoss Cycles for many years.

For more information, please contact us via our contact form

Fairing Frontpanel

With this front panel Boss Hoss also offers those who like to sit in the slipstream or listen to music
while driving. Perfect for larger tours. The delivery is usually unpainted.

For more information, please contact us via our contact form

CYLINDER HEAD COVER FRONT SIDE

We’re offering the front sides of the LS cylinder heads cover either
chrome-plated or in anodizable in various colors. The cover is milled from
aluminum and shows our logo.

For more information, please contact us via our contact form

Frontfender GFK/ Carbon

This fender is the standard front fender used in a conversion of the front wheel to 18 inches.
For mounting the fender holder must be adjusted. The material is 50% fiberglass and 50% carbon.

For more information, please contact us via our contact form